
Overview 1 Chapter
Notes
•When i.LINK input is selected, the audio input signal is automatically input from the i.LINK connector, and no indicator is displayed in audio area.
•Recording in HDV format is not possible when SG is selected.
jOutput signal display
Indicates the output video and audio signal format selected with the INTERFACE SELECT menu items (see
page 83).
Upper line: Video area (Indicates a format of the analog video output signals.)
Lower line: Audio area (Indicates an audio channel output from the analog audio output connectors.)
Video area indicators
The indicator corresponding to the selected output analog video signal format lights.
Indicator in | Signal format |
video area |
|
COMPOSITE/S | Composite video |
|
|
COMPONENT | Y, |
SD | signals |
|
|
COMPONENT | Y, Pb/Pr component HD video signals |
HD |
|
|
|
This selection determines the signals output from the Y/ CPST,
The superimposed text information output from the (SUPER) CPST connector can be set to ON (output) or OFF (do not output) with the CHARA. DISPLAY menu item (see page 75).
• When COMPOSITE/S is selected:
Connectors | Output signal |
Y/CPST | Composite signal |
|
|
C signal | |
|
|
Y signal | |
|
|
(SUPER) CPST | Composite signal |
|
|
• When COMPONENT SD is selected:
Connectors | Output signal |
Y/CPST | SD Y signal |
|
|
SD | |
|
|
SD | |
|
|
(SUPER) CPST | Composite signal |
|
|
• When COMPONENT HD is selected:
Connectors | Output signal |
Y/CPST | HD Y signal |
|
|
HD Pr signal | |
|
|
HD Pb signal | |
|
|
(SUPER) CPST | Composite signal |
|
|
Audio area indicators
Indicates the channel selection for audio signal output from the AUDIO OUT 1/3 and AUDIO OUT 2/4 connectors on the rear panel.
Indicators | Functions |
CH 1/2 | Channel 1 is output from the AUDIO OUT 1/ |
| 3 connector, and channel 2 from the AUDIO |
| OUT 2/4 connector. |
|
|
CH 3/4 | Channel 3 is output from the AUDIO OUT 1/ |
| 3 connector, and channel 4 from the AUDIO |
| OUT 2/4 connector. |
|
|
You can change the output channel selection with the AUDIO OUTPUT menu item (see page 83).
kCassette type
Indicates the type of the loaded cassette.
: Lights when a cassette is loaded.
: Lights when a cassette provided with a memory chip (“cassette memory”) is loaded.
CL: Lights when a cassette is loaded on which ClipLink log data is stored in the cassette memory.
lTime counter display
Indicates the count value of the time counter, timecode, VITC, or user bit data depending on the settings of the COUNTER SELECT button and the TC SELECT menu item (see page 78).
Also used to display error messages, edit data, setup menu data, etc.
mAudio mode
•During playback, this indicates the playback audio mode in which the tape being played back was recorded. 48K:
44.1K:
32K:
•During recording or when in
48K:
32K:
Note
Only 48K
18 Names and Functions of Parts