| AUDIO CONTROL [Audio]: Settings related to audio | Description of settings | ||
| control |
|
| |
| JOG CONTROL [> Jog ctrl]: Select whether to adjust the | OFF [>> OFF]: Do not adjust the audio playback speed. | ||
| audio playback speed during slow playback. | *ON [>> ON]: Adjust the audio playback speed. | ||
|
|
|
| |
| Note |
|
|
|
| This | setting is invalid when playing back in HDV format. |
|
|
|
|
| ||
| MUTING IN SHTL [> Shutl mute]: Set the audio muting | *OFF [>> OFF]: Not suppressed. | ||
| conditions during shuttle playback. | CUEUP or PREROLL [>> CUEUP]: Suppressed during cue- | ||
|
|
| up or preroll operations. | |
| Note |
| ||
| setting is invalid when playing back in HDV format. | FULL [>> FULL]: Suppressed in shuttle mode. | ||
| This |
|
| |
|
|
| ||
| AUDIO EDIT [> Audio edit]: Specify the type of editing for | *CUT EDIT [>> Cut edit]: Cut editing (Discontinuity in audio | ||
| audio signals. | signal may result at the editing point, causing noise during | ||
|
|
| playback.) |
|
| Note |
|
| |
| setting is invalid for the HDV format. | FADE IN/OUT [>> Fade]: Fade in and fade out | ||
| This |
|
| |
|
|
| IN | OUT |
| DV PB ATT [> DV PB ATT]: When playing back a tape | OFF [>> OFF]: Do not attenuate. | |||||
| recorded in consumer DV format, select whether to | *ON [>> ON]: Attenuate. | |||||
| attenuate the audio output level. |
|
|
|
| ||
Note |
|
| |||||
|
|
|
|
|
| ||
|
|
|
| This | setting is valid only when the recording format setting is | ||
|
|
|
| DVCAM. This is not valid for DV(SP) format. | |||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| INTERFACE SELECT [Interface]: Settings related to |
| Description of settings | ||||
| external interfaces |
|
|
|
|
| |
| VIDEO OUTPUT [> Video Out]: Select the format of analog |
| |||||
| video signals to be output from the three VIDEO OUT |
|
| output and composite output. | |||
| connectors). |
| COMPONENT (SD) [>> Compnt SD]: Set to component Y/R- | ||||
|
|
|
|
| |||
|
|
|
| COMPONENT (HD) [>> Compnt HD]: Set to component Y/Pr/ | |||
|
|
|
|
| Pb (HD) output. | ||
|
|
|
| ||||
| AUDIO OUTPUT [> Audio Out]: Select the channels for |
| *1/2 CH [>> 1/2CH]: Output channel 1 to the AUDIO OUT 1/3 | ||||
| audio output from the AUDIO OUT 1/3 and 2/4 |
|
| connector and channel 2 to the AUDIO OUT 2/4 connector. | |||
| connectors. |
| 3/4 CH [>> 3/4CH]: Output channel 3 to the AUDIO OUT 1/3 | ||||
|
|
|
|
| connector and channel 4 to the AUDIO OUT 2/4 connector. | ||
|
|
|
| ||||
| i.LINK FORMAT [> i.Link Fmt]: Select whether the i.LINK |
| * AUTO [>> AUTO]: The i.LINK output format is automatically | ||||
| output format is automatically determined, or whether it is |
|
| determined as follows. | |||
| switched according to the i.LINK input selection. |
|
| During playback: Switched automatically to DV/DVCAM | |||
|
|
|
|
|
| or HDV according to the format in which the tape is | |
| Note |
|
|
|
| ||
| the i.LINK stream is different for HDV or DV/DVCAM, |
|
|
| recorded. | ||
| Since |
|
| During recording or EE mode: HDV format when the | |||
| switching causes a bus reset on the i.LINK interface, which |
|
|
| i.LINK input is HDV, and DV/DVCAM format when | ||
| may cause a problem with some connected nonlinear editors. |
|
|
| another format is selected. | ||
| In such cases, set this item to i.LINK INPUT, and select the |
| i.LINK INPUT [>> i.Link in]:The i.LINK output format is | ||||
| i.LINK input format to match that to be used. |
|
| switched as follows, according to the i.LINK input selection. | |||
|
|
|
|
| For DV/DVCAM input selection: Fixed at DV/DVCAM | ||
|
|
|
|
|
| format. During HDV tape playback, output converted to | |
|
|
|
|
|
| DV or DVCAM according to the DV recording format. | |
|
|
|
|
|
| (i.LINK OUTPUT menu item setting is invalid). | |
|
|
|
|
| For HDV input selection: The i.LINK output is always an | ||
|
|
|
|
|
| HDV signal. | |
|
|
|
|
|
| ||
|
|
|
|
| Note |
| |
|
|
|
|
| In this | case, DV/DVCAM tape playback is not possible. | |
|
|
|
|
| For SD input selection other than i.LINK: As for AUTO, | ||
|
|
|
|
|
| the playback format is automatically switched to DV/ | |
|
|
|
|
|
| DVCAM or HDV according to the format recorded on | |
|
|
|
|
|
| the tape, and the setting of the i.LINK OUTPUT menu | |
|
|
|
|
|
| item. | |
|
|
|
|
|
|
|
|
Menus 7 Chapter
Menu Contents 83