Menu Contents
Setup Menu
The purpose and settings of the setup menu items are described below.
Indications of menu items and settings
In the table below entitled “Menu contents”, the indication of each menu item or setting on the monitor screen is shown first, then the indication of the same item or setting in the time counter display of this unit is shown in square brackets ([ ]).
Menu contents
Examples:
Indication on monitor | Indication in time counter |
screen | display |
OPERATIONAL FUNCTION | [Operational] |
|
|
CASSETTE OUT | [>> Cass. out] |
|
|
*EE | [>>> EE] |
|
|
•Settings preceded by an asterisk (such as *EE) are factory default settings.
•In the time counter display, one to three “>” symbols may precede item or setting indications depending on the current menu level. Larger numbers of “>” symbols indicate lower menu levels.
OPERATIONAL FUNCTION [Operational]: Operation | Description of settings | |
settings |
|
|
REPEAT FUNCTION [> REP | REPEAT MODE [>> | *OFF [>>> OFF]: Do not put the unit into repeat playback |
FUNC]: Make settings for | REPEAT MD]:Determine | mode. |
repeat playback mode. | whether or not to put the | ON [>>> ON]: Put the unit into repeat playback mode. |
| unit into repeat playback | ON (FREEZE) [>>> FREEZE]: Put the unit into freeze playback |
| mode. | mode. (In this case, while the unit is cueing up to the |
|
| repeat start point, the freeze picture of the repeat end point |
|
| is displayed.) |
|
|
|
| REPEAT TOP [>> REP | *TAPE TOP [>>> Tape top]: The repeat start point is the |
| TOP]: Determine | beginning of tape. |
| whether the repeat start | A POINT [>>> A point]: The repeat start point is point A as set |
| point is the beginning of | by the user. |
| tape or point A. |
|
|
|
|
| REPEAT END [>> REP | *VIDEO END [>>> VD end]: The repeat end point is the end of |
| END]: Determine | the video recorded portion. |
| whether the repeat end | TAPE END [>>> Tape end]: The repeat end point is the end of |
| point is the end of the | tape. |
| video recorded portion, | B POINT [>>> B point]: The repeat end point is point B as set |
| the end of tape or point | by the user. |
| B. |
|
|
|
|
| A PRESET [>> A preset]: | For details, see “Setting Points A and B for Repeat Playback” |
| Specify a timecode value | (page 47). |
| to be used as the setting |
|
| of point A. |
|
|
|
|
| B PRESET [>> B preset]: | For details, see “Setting Points A and B for Repeat Playback” |
| Specify a timecode value | (page 47). |
| to be used as the setting |
|
| of point B. |
|
|
|
|
Menus 7 Chapter
Menu Contents 73