Sony HVR-1500 manual 31

When the SUB STATUS menu item is set to TC MODE:

On-screen indication	Meaning
INT PRST FREE [IP F]	The internal timecode generator is
	operating in FREE RUN mode.
INT PRST REC [IP R]	The internal timecode generator is
	operating in REC RUN mode.
INT REGEN-T&U	The internal timecode generator is
[IRTU]	in synchronization with the
	playback timecode (LTC) read
	from tape.
EXT LTC-T&U [ELTU]	The internal timecode generator is
	in synchronization with the
	external timecode (LTC) input to
	the unit and is generating the
	same timecode value and user bit
	value as those of the external
	timecode (regeneration).
EXT VITC-T&U [EVTU]	The internal timecode generator is
	in synchronization with VITC
	present in the external video signal
	input to the unit and is generating
	the same timecode value and user
	bit value as those of the external
	timecode (regeneration).
EXT DVIN-T&U [EDTU]	The internal timecode generator is
	in synchronization with the
	external timecode input to the unit
	via the i.LINK ( HDV/DV)
	interface and is generating the
	same timecode value and user bit
	value as those of the external
	timecode (regeneration).
EXT DVIN. V-T&U	The internal timecode generator is
[EDTU]	in synchronization with the
	external VITC input to the unit via
	the i.LINK ( HDV/DV) interface
	and is generating the same
	timecode value and user bit value
	as those of the external timecode
	(regeneration).
EXT SDI-T&U	The internal timecode generator is
[ESTU]	in synchronization with the
	embeded LTC (RP188) input to the
	unit via the SDI interface and is
	generating the same timecode
	value and user bit value as those
	of the external timecode
	(regeneration).

When the SUB STATUS menu item is set to REMAIN:

On-screen	Meaning
indication
REMAIN 184 min	Remaining capacity of the tape in
	minutes.
	When the remaining capacity has not
	been calculated, “REMAIN --- min”
	appears.

When the SUB STATUS menu item is set to AUDIO MIXING:

On-screen								Meaning
indication
1 2 3 4								Input audio channels selected for
[MIX]								mixing
								1 2 3 4: Input audio channels 1, 2, 3
								and 4
Example display:
	12		2			3			34
								Input audio channels 3 and 4 are
								mixed and recorded on audio
								channel 4 on tape.
					Input		audio channel 3 is recorded on
					audio channel 3 on tape.
		Input		audio channel 2 is recorded on
		audio channel 2 on tape.

Input audio channels 1 and 2 are mixed and recorded on audio channel 1 on tape.

Display format of supplementary status information when the SUB STATUS menu item is set to ALL

All items of supplementary status information are displayed in the order shown below.

Example display:

T

C

R

0

0

:

0

4

:

4

7

.

0

7

P

L

A

Y

L

O

C

K

V

1

2

3

4

T

M

I

X

E

D

T

U

V

Editing mode settings

Setting for input audio mixing

Operating mode of the internal timecode generator (The rightmost “V”

appears when the VITC menu item (see page 78) is set to ON.)

Preparations 2 Chapter

Displaying Supplementary Status Information 31