Figure 19.7.0 - POS REQUEST REPLY menu
The CPV550 has the capability to turn off the Position Request ringer.
1.Select the chart page and press the [MENU] key two times. Move the ShuttlePoint knob to highlight RADIO SETUP and press the [ENT] key or move the ShuttlePoint knob to the right.
2.Move the ShuttlePoint knob to highlight DSC SETTINGS and press the [ENT] key or move the ShuttlePoint knob to the right.
3.Move the ShuttlePoint knob to highlight RINGER OUTPUT and press the [ENT] key or move the ShuttlePoint knob to the right.
4.Move the ShuttlePoint knob to select POLLING and press the [ENT] key or move the ShuttlePoint knob to the right.
5.A popup window will be shown with On or Off, move the ShuttlePoint knob to select Off and press the [ENT] key or move the ShuttlePoint knob to the right.
6.Press the [CLR] key until the menu disappears or an easier method is to move the ShuttlePoint knob to the left a few times.
If you wish to return to enabling the ringer tone, just repeat the above procedure, moving the ShuttlePoint knob to select On in step “5” above.
Figure 19.7.0 - RINGER OUTPUT menu
19.7.1 Transmitting a Position Request to Another Vessel
Using the Individual directory to make a Position request
1.Select the chart page and press the [CALL] key. The “DSC Operation” menu soft keys will appear below the display.
Page 112 | CPV550 |