4.MAP FUNCTIONS

4.0NEW MAX FUNCTIONS MENU

1.From the chart page, press [MENU] twice. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move the ShuttlePoint knob to the right. The MAX Functions menu appears on the screen:

Figure 4.0 - Map Functions Menu

The available Functions are described in the following.

4.0.0Zoom Type

Allows more expansions or compression of the chart scale while zooming in or out. Zoom Mode has two options; STANDARD (default) or FLEXI-ZOOM. When in FLEXI-ZOOM mode, a short zoom push causes a change of chart, while a long zoom push causes a pop- up window to be displayed on a corner of the screen. The window shows the current Zoom factor. By pressing [ZOOM] and moving the knob up/down the map is expanded or compressed according to the zoom factor selected. The window is automatically closed if [ZOOM] is not pressed for 2 seconds and the selected zoom factor will be used at the next zoom in/out.

To activate this function follow the procedure:

1.Press [MENU] twice. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move the ShuttlePoint knob to the right.

2.Move the ShuttlePoint knob to highlight ZOOM TYPE and press [ENT] or move the ShuttlePoint knob to the right.

3.The menu now shows two selections, STANDARD or FLEXI-ZOOM.

4.Move the ShuttlePoint knob to select the selection and press [ENT].

5.Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint knob to the left a few times.

4.0.1Fonts & Symbols

On MAX charts it is possible to set the size of all names and symbols drawn on the charts, selecting between Normal size (the regular characters size) and Large size.

To activate this function follow the procedure:

1.From the chart page, press [MENU] twice. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move the ShuttlePoint knob to the right.

2.Move the ShuttlePoint knob to highlight FONTS & SYMBOLS and press [ENT] or move the ShuttlePoint knob to the right.

3.The menu now shows two selections, NORMAL or LARGE.

CPV550

Page 29