13.2NAVIGATION PAGE
This page is useful to show information when heading to a destination. The default page is shown with a Compass Rose, however this can be customized to show a Compass Tape.
1.To change to show the COMPASS TAPE, select the Chart page, press [MENU] twice. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move the ShuttlePoint knob to the right.
2.Move the ShuttlePoint knob to highlight WINDOW SETUP and press [ENT] or move the ShuttlePoint knob to the right.
3.Move the ShuttlePoint knob to highlight NAVIGATION PAGE and press [ENT] or move the ShuttlePoint knob to the right.
4.Move the ShuttlePoint up or down to select COMPASS TAPE and press [ENT].
5.Press [CLR] or move the Shuttlpoint knob to the right until the Chart page is shown.
1Fix position
2 | Date | 1 | 8 |
|
|
| |
3 | Course Over Ground | 2 |
|
|
|
|
4Time
| 3 |
5 Distance | 9 |
| 4 |
6Speed Over Ground
7 | Bearing to Destination | 5 |
| ||
8 | VHF information | 6 |
| ||
9 | Compass Rose | 7 |
Figure 13.2 - Navigation Data page with Compass Rose
1Fix position
2Compass Tape
3Time
4Time To Go
5Distance to Destination
6VHF Information
7Speed Over Ground
8Course Over Ground
9Bearing to Destination
1
2
3
4
5
6
7
8
9
Figure 13.2a - Navigation Data page with Compass Tape
Page 70 | CPV550 |