11.0TRACKING

You may have to take a few trips to see how you like the Distance or Time Interval setup on the previous step. However when using the tracking feature you will notice every time a Track Point is layed down on the Chart page a small filled in circle is shown on the Track line. If you move the cursor over the top of the circle a popup window will be shown with the Time, Water Temperature, Speed and Course Over Ground (COG) this is very useful if you are fishing and want to review the conditions where the fish were being caught.

Figure 11.0 - Tracking

11.0.0 Saving and starting a new Track

A Track is automatically saved to memory. To start a new Track:

1.From the chart page, press the [MENU] key. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT].

2.Move the ShuttlePoint knob to highlight TRACK and press [ENT].

3.Move the ShuttlePoint knob to highlight ACTIVE TRACK and press [ENT].

4.Move the ShuttlePoint knob up/down to select the next available open Track and press [ENT] or move the ShuttlePoint knob to the right.

5.Move the ShuttlePoint knob to highlight TRACKING and press [ENT] to set On.

6.Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.

7.A new Track now will be laid down.

11.0.1 Other Settings in Track Menu You will notice the Track menu has other selections

TRACKING

Allows turning on or off the tracking function

ACTIVE TRACK

This selection allows you to save a Track to one of the 5 Tracks available

VISIBLE

Shows or hides a Track shown in ACTIVE TRACK menu

LINE COLOR

Selects the color of the Track line

DELETE

Deletes a Track selected in the ACTIVE TRACK menu

STEP UNIT

Allowable selection are Distance or Time

DISTANCE

Setup the Distance interval the Track point is placed on the Chart page

TIME

Setup the TIME interval the Track point is placed on the Chart page

CPV550

Page 59