20.1UNIT NAME
This selection allows you to provide the name to the radio and optional RAM+ or
1.Select the chart page and press the [MENU] key two times. Move the ShuttlePoint knob to highlight RADIO SETUP and press the [ENT] key or move the ShuttlePoint knob to the right.
2.Move the ShuttlePoint knob to highlight VHF SETTING and press the [ENT] key or move the ShuttlePoint knob to the right.
3.Move the ShuttlePoint knob to highlight UNIT NAME and press the [ENT] key or move the ShuttlePoint knob to the right.
4.Move the ShuttlePoint knob to select the Unit (CP, RAM1, or RAM2) to be named and press the [ENT] key or move the ShuttlePoint knob to the right.
5.Move the ShuttlePoint knob to up or down to scroll through the first letter of the unit name. You may enter the name from the keypad. For example: press the [1] key repeatedly to toggle among the four available characters associated with that key: AÆBÆCÆ1.
6.Move the ShuttlePoint knob to the right to enter the first character and step to the next letter to the right.
7.Repeat step 5 and 6 until the name is complete. The name can consist of up to twelve characters.
8.Press the [CLR] key until the menu disappears or an easier method is to move the ShuttlePoint knob to the left a few times.
Figure 20.1 - UNIT NAME menu
Page 118 | CPV550 |