9.Move the ShuttlePoint knob up/down to change the characters and left/right to select a different character in the Routes Name.
10.When finished press [ENT] to save.
11.Press [CLR] to show the Chart page is shown.
10.3INSERTING A WAYPOINT INTO A ROUTE
Place the cursor on the navigation line between two points and press [RTE]. Move the ShuttlePoint knob to the desired location of the Waypoint and press [ENT].
10.4GOTO A ROUTE 10.4.0 By select Route
1.Move the ShuttlePoint knob to an open position (no buoy, warning etc. under the cursor) on the Chart page.
2.Press [GOTO] to show the GOTO popup window.
3.Move the ShuttlePoint knob to highlight ROUTE and press [ENT].
4.The SELECT ROUTE popup window will be shown.
5.Move the ShuttlePoint knob to the highlight the desired Route and press [ENT].
6.On the Chart page a circle with a Flag is shown on the first leg of the Route and a navigation line is shown, indicating the GPS Chart Plotter is navigating to the first Waypoint in the Route.
Figure 10.4.0 - Select a Route
10.4.1 By Cursor key
1.On the Chart page move the ShuttlePoint knob until the cursor reaches the starting point of the Route.
2.Press [GOTO] to start following the Route.
3.Press [CLR] twice to revert to Home mode.
10.5OTHER SETTINGS IN ROUTE MENU
You will notice the ROUTE menu has other selections.
SELECT | Choose an available Route to create or choose a stored Route to show and follow on the Chart page. |
DELETE | Deletes the Route when shown in the above SELECT menu. |
REVERSE | Reverses the Route, when chosen Starting point is at the end of the Route. |
COLOR | Allows changing the color of the navigation lines between in leg in the Route. |
REPORT | The Route Report menu is useful to show details of the Waypoints contained within the Route. This |
| menu also allows you to enter in your average speed and fuel consumption and calculate the |
| approximate fuel used when following the Route. |
SEND | Sends the stored points to a external device (PC) capable of listening to NMEA RTE sentence. |
RECEIVE | Receive the points from an external device (PC) capable of sending NMEA RTE sentence. |
CPV550 | Page 57 |