21.3DSC/RADIO SETUP MODE

The RAM+ can access the DSC / RADIO setup menu (refer to section “19. DIGITAL SELECTIVE CALLING” and section “20. RADIO SETUP MODE” for details). The LAMP, CONTRAST, and KEY BEEP menu item accessed from the RAM+ only controls the RAM+’s display and speaker.

DSC/RADIO Setup mode from the RAM+:

1.Press and hold down the [CALL/SET] key until “RADIO SETUP” menu appears.

2.Press the [UP(S)] / [DOWN(T)] key to select “RADIO SETUP” or “DSC SETUP” menu.

3.Press the [CALL/SET] key, then select the menu item you wish to work on by pressing the [UP(S)] / [DOWN(T)] key.

4.Press the [CALL/SET] key.

5.Press the [UP(S)] / [DOWN(T)] key to change the value or condition for the menu item, then press the [CALL/SET] key to save the new setting.

6.Press the [UP(S)] / [DOWN(T)] key to select “EXIT,” then press the [CALL/SET] key to return to the normal operation.

RADIO SETUP-menu

DSC SETUP-menu

NOTE

When setup menu is selected, the CPV550 will be temporarily disabled until the RAM+ mic, exits from the setup mode.

Page 122

CPV550