2.7FF520 FISH FINDER SETUP

When a FF520 is connected to the GPS Chart Plotter:

a.The Gray and white wires cannot be used to connect to external NMEA devices.

b.Port 2 of the NMEA in/out Communication setup menu must be changed so the GPS Chart Plotter can communicate with the FF520.

1.From the Chart page, press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].

2.Move the ShuttlePoint knob to highlight ADVANCED SETUP and press the [ENT] key.

3.Move the ShuttlePoint knob to highlight IN/OUT CONNECTIONS and press the [ENT] key.

4.Move the ShuttlePoint knob to highlight PORT2 INPUT and press the [ENT] key.

5.Move the ShuttlePoint knob up/down to select FF520 and press the [ENT] key. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.

Figure 2.7 IN/OUT CONNECTION menu

2.7.0AUX Connector Table

Pin

Wire Color

Description

Connection Example

Additional Information

1

Black

NMEA Common

Common for NMEA devices

 

2

Red

---

No Connection

 

3

Green

NMEA Common

Common for NMEA devices

 

4

Blue

---

No Connection

 

5

Brown

---

No Connection

 

6

Gray

NMEA Input Port 4

Conncect to output of NMEA device

Default is NMEA0183

7

White

NMEA Output Port 4

Conncect to intput of NMEA device

Default is NMEA0183 with GLL. RMB, RMC, and XTE sentences

8

Yellow

---

No Connection

 

Page 22

CPV550