CURSOR SPEED

Selects the preferred speed among Low, Medium and High for the cursor in the Chart

 

page and within the menu.

MEASURE DISTANCE

When this function is turned on allows a distance to be measured between two points

 

using the ShuttlePoint knob and [ENTER] key.

WINDOWS SETUP

This menu selection allows the data windows to be customized on the Chart and

 

Navigation pages.

LANGUAGE

Allows changing the language for menus and data screens.

AUTO INFO

By default when the cursor is moved over a buoy, Mark or other item a popup window will

 

show information of the item. This menu item allows the window to be turned on or off.

CURSOR WINDOW

By default when the cursor is moved a window is shown with the Lat/Lon Distance and

 

bearing from the vessels location to the cursor. This selection allows the window to be

 

turned off.

CURSOR POSITION

The position of the cursor (vessels location) can be customized so it centered in the middle

 

or centered on the bottom of the chart page. The default is “Center”.

COG TIME LINE

Is a line projected from the vessel icon which indicates the distance your vessel will travel

 

at the current speed. Selections are 2, 10, 30 minutes, 1, 2 hours and infinite.

7.8INFORMATION PAGE

From the Main Menu page it is possible to select an Information page containing Software, Chart and Optional device information.

Figure 7.8 - Information page

1.From the Chart Page, press [MENU] twice. Move the ShuttlePoint knob to highlight About... and press [ENT] or move the ShuttlePoint knob to the right.

2.The Information page appears on the screen (see the previous Figure).

3.Press [CLR] or move the ShuttlePoint knob to the left to exit and show the Chart page.

Page 48

CPV550