Star Micronics NB24-10/15 i ‘igure 1-6. To thread the ribbon, slide the print head carriage

to your right or left until the ribbon automatically slips down into its proper place between the print head and the silver ribbon guide.

._
i ‘igure 1-6.To thread the ribbon, slide the print head carriage
manually to the right OP left, and the ribbon will slip down by itself into
its proper position.	-

7.Replace the printer cover. (A switch on the printer prevents the printer from operating when the cover is off .)

nInstalling the mute cover

1

Printer

1

Figure 1-7.Install the mute cover by holding vertically, then lay down on the printer cover.

-

-