Star Micronics NB24-10/15 user manual Making Words Stand Out

Models: NB24-10/15

1 133
Download 133 pages 41.98 Kb
Page 68
Image 68
MAKING WORDS STAND OUT

c

h

i.

k%

c

ib

L

59

Try this program to see how the proportional spacing works.

10 ' Demo of proportional printing

20 LPRINT CHR$(27);"M";

30 LPRINT "This line is NORMALELITE printing."

40 LPRINT CHR$(27);"pl";

50 LPRINT "This line is PROPORTIONAL ELITE."

60 LPRINT CHRS(27);"P";

70 LPRINT "This line is PROPORTIONAL PICA."

80 LPRINT CHRS(27);"pO";

90 LPRINT "This line is NORMALPICA printing."

100 END

When you run this program you should get this:

This line is NORMALELITE printing.

This line is PROPORTIONAL ELITE.

This line is PROPORTIONAL PICA.

This line is NORMAL PICA printing.

Line 20 selects the elite pitch and line 40 turns on the propor- tional printing with (ESC) “p” 1. Line 50 prints a line with pro- portional elite pitch. Then, line 60 selects the pica pitch, so that

line 70 prints a line with proportional pica pitch. Finally,line 80

resets the proportional printing and line 90 prints a line in nor- mal pica pitch.

NOTE: 1) You cannot use the proportional spacing with the draft characters.

2)When you set the “Print Pitch Panel” mode by the Print Pitch key on the control panel at power-on, these control codes related print pitches except expand print mode are ignored.

MAKING WORDS STAND OUT

Your printer has good print density when it’s just printing nor-

i,mally. But sometimes you may want something to stand out from the rest of the page. This printer provides two ways to do

Page 68
Image 68
Star Micronics NB24-10/15 user manual Making Words Stand Out