Star Micronics NB24-10/15 user manual It should come out like this

52

characters before line 70 switches printer back to internal LQ characters with an (ESC) “k” CHR$(O) command.

You can control the font styles with the extra functions with the control panel.

Table 4-3

Font selection commands

Function	Control code
Selects font slot 1	(ESC) “k” CHR$(l)

Selects font slot 2 (15~inchtype only) (ESC) “k” CHR$(B)

Selects internal characters (ESC) “k” CHR$(O)

nUnderlining and overlining

Not only can your printer print all styles of printing in both roman and italic, but it can underline and overline them too. The control codes are shown in Table 4-4.

		Table 4-4
	Underline	and overline	commands
Function		Control code
Underline	ON	(ESC) “-” 1
Underline	OFF	(ESC) “-” 0
Overline	ON	(ESC)	“A”	1
Overline	OFF	(ESC)	“-”	0

It’s that simple. Let’s try it with this program:

10 ’ Demo of underlining and over lining

20 LPRINT "Demo of ";

30 LPRINT CHR$(27);"-1";

40 LPRINT "UNDERLINED";

50 LPRINT CHR$(27);"-0";

60 LPRINT w and ";

70 LPRINT CHR$(27);" 1";

80 LPRINT "OVERLINED";

90 LPRINT CHR$(27);"-0";

100 LPRINT w printing."

It should come out like this:

Demo of UNDERLINED and m printing.