Star Micronics SJ-48 Set vertical tab stops every n lines, Set vertical tab stops in channel

Set vertical tab stops every n lines

<ESC> “e”	“l”	n	27101 49	n	IB	65 31	n
<ESC> “e”	<1>	n	27101 1	n	IB	65 01	n

Cancels all current vertical tab stops and sets new tab stops every n lines, where n is between 1 and 127.

Set vertical tab stops in channel

<ESC>“b” nO	nl	27 98 no n]	IB 62 nO nl
n2	.... <0>	n2 . 0	n2	00

Cancels all current vertical tab stops in channel roll,(where rdlis between Oand 7) and sets new vertical tab stops in this charnel. (A channel is a set of vertical tab stops selected by the <ESC> “/” command.) See <ESC> “B” for parameters n], n2,

... <o>.

Select vertical tab channel

‘ nO 47 nO IB 2F no

Selects a set of vertical tab stops designated by a channel number (T@from Oto 7. The tab stops in each channel are set by <ESC> “b”.

Vertical tab

Both

Feeds the paper to the next vertical tab stop and moves the print position to the left margin. Performs a line feed if no vertical tabs are set, as at power-up. Feeds to the top of the next page if vertical tabs are set but the current line is at or below the last vertical tab stop.

52