Star Micronics SJ-48 manual Select graphics mode, On ml, m2

Select graphics mode

4Y3G “*” nO	nl	27 42 nO nl	IB 2A nO nl
Std.	m2	n2 ml m2	n2 ml m2
n2 ml

Selects one of eleven graphics modes depending on the value of nOand prints bit- image graphics in this mode. See <ESC> “K” (for 8-bit graphics), <FS> “Z” (for 24-bit graphics) or <ESC> “l” “*” (for 48-bit graphics) for information on nl, n2, ml, m2, ...

nO	Graphics mode
o	8-bit Normal-density	(60 dots per inch)
1	8-bit Double-density	(120 dots per inch)
2	8-bit Double-density	(120 dots per inch)
3	8-bit Quadruple-density	(240 dots per inch)
4	8-bit CRT graphics, mode I	(80 dots per inch)
6	8-bit CRT graphics, mode II	(90 dots per inch)
32	24-bit Normal-density	(60 dots per inch)
33	24-bit Double-density	(120 dots per inch)
38	24-bit CRT graphics	(90 dots per inch)
39	24-bit Triple-density	(180 dots per inch)
40	24-bit Hex-density	(360 dots per inch)
64	48-bit Normal-density	(60 dots per inch)
65	48-bit Double-density	(120 dots per inch)
70	48-bit CRT graphics	(90 dots per inch)
71	48-bit Triple-density	(180 dots per inch)
72	48-bit Hex-density	(360 dots per inch)

Select graphics mode

	43SC> ““ “g” nl	n2	28 91 103 nl n2	IB 5B 67 nl n2
IBM	[			ml m2
	mO ml	m2

Selects one of eight graphics modes depending on the value of mOand prints dot graphics in this mode. The graphics image is (nl + n2 x 256)– 1 dots wide. See <ESC> “K” (for 8-bit graphics) or <FS> “Z” (for 24-bit graphics) for information

on ml, m2, ...

mO	Graphics mode
o	8-bit Normal-density	(60 dots per inch)
1	8-bit Double-density	(120 dots per inch)
2	8-bit Double-density	(120 dots per inch)

38-bit Quadruple-density (240 dots per inch)

824-bit Normal-density (60 dots per inch)

924-bit Double-density (120 dots per inch)

11	24-bit Triple-density	(180 dots per inch)
12	24-bit Hex-density	(360 dots per inch)

Chapter6 PRINTER CONTROL COMMANDS 59