Star Micronics SJ-48 manual Horizontal Position Commands, Set left margin, Set right margin

HORIZONTAL POSITION COMMANDS

Set left margin

I
I Std. ] <ESC> “l” n	I 27 108 n	I IB 6C n	I

Sets the left margin at column n (where n is between O and 255) in the current character pitch (pica pitch if proportional spacing is selected). The left margin does not move if the character pitch is changed later. The left margin must be at least two columns to the left of the right margin and within the limits below:

Pica	()= ~ 576		Expanded pica	O<n =38
Elite	()= ~ =91		Expanded elite	()<~	=45
Semi-condensed Osn= 114			Expanded semi-condensed	Osn	=57
Condensed pica	Osn	S 130	Expanded condensed pica	OSn s64
Condensed elite	O~ns	152	Expanded condensed elite	OSn s76

Set right margin

n 27 81 n IB 51 n

Sets the right margin at column n in the current character pitch (pica pitch if proportional spacing is currently selected). Column n becomes the last character position in the line.

The right margin does not move if the character pitch is changed later. The right margin must be within the limits below:

Pica	4S	n s80	Expanded pica	2 Sn	S40
Elite	55	n s96	Expanded elite	3 ~ ~ 548
Semi-condensed	6sn	~120	Expanded semi-condensed	3Sn	S60
Condensed pica	7= n =137		Expanded condensed pica	45n	568
				4~n~	80
Condensed elite	8~n	S160	Expanded condensed elite

Set left and right margjns

]			I
IBM ] <ESC> “X” nl	n2	27 88 nl n2	IB 58 nl n2

Sets the left margin at column nl and the right margin at column rz2. See the preceding commands for margin restrictions and other notes.

Carriage return

)

Both ] <CR> 13

Prints the current line and returns the next print position to the left margin. If DIP switch 3 is set to OFF, also performs a line feed.

Chapter6 PRINTER CONTROL COMMANDS 53