Loading the paper from the flat feed slot

1. Raise the printer by adjusting the printer stand as shown below.

I

 

 

 

 

 

 

F

3 R

p

w

p

s

 

2.

Open the top cover and rotate the adjustment dial counterclockwise.

 

3.

Slide the

Power

switch

to turn on the power, and press the I

] and

 

[

1 buttons until you hear a short beep tone.

 

4.Align the envelope (or the paper) with the scales of the flat feed slot and insert the envelope straight into the slot.

The’envelope automatically sets to the printing position.

—.

A

the e

w

s

f f

s

f

FlgUre 3-7.

5.If you want to set the paper to a different position, set the printer off-line by pressing

the I ON I button, then set the paper position by using the micro-feed function. (For details, refer to Chapter 4.)

6.Press the [ ON ] button to set the printer on-line.

NOTE: Remove the envelope by hand if it is not ejected after printing.

Chapter3 PAPER HANDLING 17

Page 23
Image 23
Star Micronics SJ-48 manual Loading the paper from the flat feed slot