Star Micronics SJ-48 Feed paper n lines, Set top of page at current position, Set bottom margin

Feed paper n lines

<ESC>	“f’	“ l“	n	27102	49	n	IB	66	31	n
<ESC>	“f’	<1>	n	27102	1	n	IB	66	01	n

Feeds the paper n lines from the current line, where n is between Oand 127.

Set top of page at current position

IBM <ESC> “4” 27 52 IB 34

Sets the current position as the top-of-page position. Note that this can also be done from the control panel.

Set bottom margin

I				J
Both <ESC> “N” n	27 78	n	IB 4E	n

Sets the bottom margin ton lines, where n is between 1and 127in Standard mode or between 1 and 255 in IBM mode.

Cancel bottom margin

<ESC> “O” 27 79 IB 4F

Cancels the bottom margin.

Form feed

<FF>12

Feeds the paper to the top of the next page, and moves the print position to the left margin.

Set vertical tab stops

Both <ESC> “B” nl n2 4)> 27 66 11/ n2 . 0 IB 42 nl n2 00

Cancels all current vertical tab stops and sets new vertical tab stops at lines nZ, n2, etc., where nf, n2, etc. are numbers between 1and 255. A maximum of 16vertical tab stops can be set. The tab stops must be specified in ascending order; any violation of ascending order terminates the lab stop list. Standard termination is by the <0> control code. The vertical tab stops are set in terms of the current line spacing and do n.. .. ove if the line spacing is changed later.

Chapter6 PRINTER CONTROL COMMANDS 51