State Industries STC-074 Qualifications, Custom Commercial Storage Tank Model Number Break Down

SBN TANK TYPE COMMERCIAL GAS WATER HEATER

SERVICE HANDBOOK

Qualifications

Installation or service of this water heater requires ability equivalent to that of a licensed tradesman in the field involved. Plumbing, air supply, venting, gas supply and electrical testing skills are required.

Tools Required

•Phillips head screwdriver

•standard screwdrivers

•3/8 and 7/16 inch open end wrench

•set of marked drill bits

•electrical multimeter tester capable of measuring continuity, AC voltage and DC voltage

•gas pressure gauge or manometer (gauge - pt. no. 8099-2)

•water pressure gauge (pt. no. 4798)

•thermometer (pt no. 4870 - range 0 - 220 degrees F)

•1/2 inch socket with extension for removal of the clean out cover

•1-1/16 inch socket with extension for anode removal

Custom Commercial Storage Tank Model Number Break Down

U G V 6 6 0 1 5 0 0 V A 1 2 5

U = Unjacketed

J = Jacketed

G= Glass-Lined E= Epoxy

B = Black Steel C + Cement

V = 5 Year Warranty

Diameter

Gallon Capacity

	ASME Pressure Rating =
V = Vertical
H = Horizontal	100# or 125# or 150# or 160#

A = ASME

SPECIAL NOTE: All model number appearing on rating plate and carton labels will

be compressed. Example: UGV6601500VA125

Technical Training Department 3 ©2003

Ashland City, Tennessee