Sun Microsystems 280R manual Become superuser or the root user, Type the following luxadm command

■Synchronize and unmount any file systems mounted on the drive.

You must follow antistatic precautions when handling a disk drive. Complete this task:

■“How to Avoid Electrostatic Discharge” on page 120

What to Do

1. Become superuser or the root user.

%su

Password: <root_password>

#

2.Type the following luxadm command:

Where <c1t1d0s2> is the logical device name for the drive. The system dialogue follows the command.

#luxadm remove_device /dev/rdsk/<c1t1d0s2>

WARNING!!! Please ensure that no file systems are mounted on these device( s).

All data on these devices should have been backed up. The list of devices which will be removed is:

1:Device name: /dev/rdsk/c1t1d0s2 Node WWN: 20000020371b1f31 Device Type: Disk device

Device Paths: /dev/rdsk/c1t1d0s2

3.Type c at the prompt to verify the list of devices:

Please verify the above list of devices and

then enter c or <CR> to Continue or q to Quit. [Default: c]:c

stopping: /dev/rdsk/c1t1d0s2.... Done

offlining: /dev/rdsk/c1t1d0s2.... Done

The drives are now offline and spun down.

Chapter 5 Using and Servicing Internal Storage Devices 129