Sun Microsystems 280R manual # cd /opt/SUNWvts/bin # ./sunvts -display localhostname0

4.Type:

#cd /opt/SUNWvts/bin

#./sunvts -display local_hostname:0

Substitute the name of the workstation you are using for local_hostname. Note that /opt/SUNWvts/bin is the default directory for SunVTS binaries. If you have installed SunVTS software in a different directory, use the appropriate path instead.

5.Fine-tune your testing session by selecting only the tests you want to run.

Click to select and deselect tests. (A check mark in the box means the item is selected.) Some tests useful to run on a Sun Fire 280R server are listed below.

SunVTS Test	Description
cdtest,	Tests the DVD/CD-ROM drive by reading the disc and verifying
dvdtest	the DVD/CD table of contents (TOC), if it exists
cputest	Tests the CPU
disktest	Verifies local disk drives
env5test,	Tests power supply, fan tray, LEDs
i2ctest
fputest	Checks the floating-point unit
fstest	Tests the integrity of the software’s file systems
m64test	Tests the PCI graphics board
mptest	Verifies multiprocessor features (for systems with more than
	one processor)
nettest	Checks all the hardware associated with networking (for example,
	Ethernet, token ring, quad Ethernet, fiber optic, 100-Mbit per second
	Ethernet devices)
pmem	Tests the physical memory (read only)
rsctest	Tests the RSC card
sptest	Tests the system’s on-board serial ports
tapetest	Tests the various Sun tape devices
usbkbtest	Tests the keyboard
vmem	Tests virtual memory (a combination of the swap partition and the
	physical memory)

200 Sun Fire 280R Server Owner’s Guide • January 2001