Sun Microsystems 280R manual Error Messages, About OpenBoot Prom Commands

Error Messages

When a test fails, OpenBoot Diagnostics displays a message similar to the following example.

obdiag>	test 4
Hit the	spacebar to interrupt testing
Testing	/pci@8,700000/ebus@5/flashprom@0,0
ERROR	: FLASHPROM CRC-32 is incorrect
SUMMARY: Obs=0x4374a5be Exp=0xffffffff XOR=0xbc8b5a41 Addr=0xfefffffc

DEVICE :	/pci@8,700000/ebus@5/flashprom@0,0
SUBTEST:	selftest
CALLERS:	(f00aeeb4)
MACHINE:	Sun Fire 280R (2 X UltraSPARC-III)
SERIAL#:	12134113
DATE :	10/31/2000 19:13:39 GMT

Selftest at /pci@8,700000/ebus@5/flashprom@0,0 (return:1,errors:1) ... failed

Hit any key to return to the main menu

About OpenBoot PROM Commands

This section describes the OpenBoot PROM commands you can run and explains what each command does.

The show-devsCommand

Use the OpenBoot PROM show-devscommand to list the devices in the system configuration.

The printenv Command

Use the OpenBoot PROM printenv command to display the OpenBoot PROM configuration variables stored in the system NVRAM. The display includes the current values for these variables as well as the default values. You can also specify a variable to display the current value for that variable only.

Chapter 6 Diagnostics, Monitoring, and Troubleshooting 171