Sun Microsystems 280R manual Disk drive handle

4.Using your thumb and forefinger, pinch the disk drive latch sideways to release the drive handle.

Pull the handle away from the drive until you feel the drive connector disengage from the backplane connector.

Disk drive handle

5.Holding the disk drive by the handle, slide it out of the drive bay.

Note –When you reinstall the drive (or a replacement drive), be sure to install it into the same drive bay as the one from which it was just removed.

6.Place the disk drive on an antistatic mat.

Chapter 5 Using and Servicing Internal Storage Devices 123