Sun Microsystems CP3240 manual Removing a Switch From the Front of the Server

1.8.1.1Removing a Switch From the Front of the Server

1.Move the front cable management bracket to the lower position (FIGURE 1-6).

FIGURE 1-6Front Cable Management Bracket in Lower Position

2.Disengage the injector/ejector mechanisms at the top and bottom of the board to notify software that the board is about to be removed. Wait for the Hot-Swap LED to light.

FIGURE 1-7shows the proper way to remove or insert a hot-swappable board into a system.

Chapter 1 Getting Started 1-11