Sun Microsystems CP3240 manual CODE EXAMPLE 4-5 Example Console Output Continued

CODE EXAMPLE 4-5Example Console Output (Continued)

6 - Retrieve Error Log using TFTP

7 - Retrieve Error Log using XMODEM/YMODEM/ZMODEM

8 - Erase Current Configuration

9 - Erase Permanent Storage

10 - Select Boot Method

11 - Activate Backup Image

12 - Start Diagnostic Application

13 - Reboot

Select option (1-13): 10

Current Boot Method: FLASH

1 - Flash Boot

2 - Network Boot

3 - Serial Boot

4 - Exit without change Select option (1-4): 2

Enter Server IP []:10.10.3.199 Enter Host IP (# or dhcp) []:dhcp

Enter Transfer Method (tftp or ftp) [ftp]: Enter Filename []:/switch.1.0.1.0.stk Accept changes? Press(Y/N): y

*****************************************************************

***

* Use the [`] key above the TAB to switch between BASE and FABRIC. *

*****************************************************************

***

switch, Base, Primary Flash, image1

--- Utility Menu ---

1 - Start Switch Application

2 - Load Code Update Package using TFTP/FTP

3 - Load Code Update Package using XMODEM/YMODEM/ZMODEM

4 - Copy Primary Flash to Backup Flash

5 - Select Serial Speed

6 - Retrieve Error Log using TFTP

7 - Retrieve Error Log using XMODEM/YMODEM/ZMODEM

8 - Erase Current Configuration

9 - Erase Permanent Storage

10 - Select Boot Method

11 - Activate Backup Image

12 - Start Diagnostic Application

13 - Reboot

4-16Sun Netra CP3240 Switch Installation Guide • September 2009