4.1IPMI Firmware Sensors
This section describes the IPMI firmware sensors.
4.1.1State Sensors
TABLE 4-1 IPMI State Sensors
Sensor | Name | Type | Description | Discrete States Returned |
|
|
|
|
|
| TABLEFRU | State | hotswap discrete | M state, per ATCA spec |
| 0HOT_SWAP |
| state |
|
1 | RTM hotswap | State | hotswap discrete | M state, per ATCA spec |
|
|
| state |
|
2 | AMC 0 | State | hotswap discrete | M state, per ATCA and AMC |
| hotswap |
| state | spec |
3 | AMC 1 | State | hotswap discrete | M state, per ATCA and AMC |
| hotswap |
| state | spec |
4 | AMC 2 | State | hotswap discrete | M state, per ATCA and AMC |
| hotswap |
| state | spec |
5 | IPMB physical | State | IPMB Link sensor | Defined in ATCA spec. |
6 | BMC Watchdog | State | Watchdog timer | Discrete, Watchdog 2 (per the |
|
|
|
| IPMI spec) |
11 | RTM Presence | State | Rear Module | State 01h = Device absent, 02h |
|
|
| Present Signal | = Device present |
12 | Base Early* | State | Base firmware | Asserted indicates Uboot |
|
|
| signal | prompt |
13 | Base Full* | State | Base firmware | Asserted indicates Linux has |
|
|
| signal | booted |
14 | Base Good* | State | Base firmware | Asserted indicates FASTPATH |
|
|
| signal | has loaded |
15 | Fabric Early* | State | Fabric firmware | Asserted indicates Uboot |
|
|
| signal | prompt |
16 | Fabric Full* | State | Fabric firmware | Asserted indicates Linux has |
|
|
| signal | booted |
17 | Fabric Good* | State | Fabric firmware | Asserted indicates FASTPATH |
|
|
| signal | has loaded |
|
|
|
|
|
