Sun Microsystems CP3240 manual Configuring Switch Software

3.1.2	P6(1-2)	Fabric Zero Reset Configuration Word			3–3
3.1.3	P6(3-4)	Base Zero Reset Configuration Word			3–3
3.1.4	P8(1-2)	Base Write Protect 3–3
3.1.5	P8(3-4)	Fabric Write Protect		3–4
3.1.6	P9 IPMC Firmware Program			3–4
3.1.7	P10(1-2) IPMC Reset		3–4
3.1.8	P10(3-4) IPMC FWE		3–5
3.1.9	P11(1-2)Forced-Board Enable 3–5
3.1.10	P11(3-4) IPMC Board Reset			3–5
3.1.11	P12(1-2) and P12 (3-4) EMI Ground to Logic Ground 3–6
3.1.12	P13 Serial Direction		3–6

3.2Jumper Locations 3–7

4. Configuring Switch Software		4–1
4.1	IPMI Firmware Sensors	4–2

4.1.1State Sensors 4–2

4.1.2Threshold Sensors 4–4

4.2uBoot 4–5

4.2.1uBoot Console 4–5

4.2.2	E-Keying Control in uBoot 4–6
4.2.3	Serial-Baud Rate Control in uBoot 4–7

4.3Linux 4–7

4.3.1e-Keying4–7

4.3.2e-Keying Bypass 4–8

4.3.3ATCA LEDs 4–8

4.4Serial Select 4–8

4.5Serial Location 4–9

4.5.1	Changing Serial Location from UBoot 4–9
4.5.2	Changing Serial Location from FASTPATH 4–9

viii Sun Netra CP3240 Switch Installation Guide • September 2009