Sun Microsystems X4150 manual Installing the Cable Management Arm, 7Cable Management Arm CMA

4.Simultaneously push and hold the slide-rail release buttons on each mounting- bracket while you push the server into the rack. (See FIGURE 2-6.) Continue pushing until the slide-rail locks on the front of the mounting-brackets engage the slide-rail assemblies.

You will hear an audible click.

Caution – Verify that the server is securely mounted in the rack and that the slide- rails locks are engaged with the mounting-brackets before continuing.

Installing the Cable Management Arm

Use this procedure to install an optional cable management arm (CMA). FIGURE 2-7shows the CMA.

FIGURE 2-7Cable Management Arm (CMA)

CMA rail extension

1.Unpack the cable management arm parts.

2.Take the CMA to the back of the equipment rack and ensure that you have adequate room to work around the back of the server.

Note – References to “left” or “right” in this procedure assume that you are facing the back of the equipment rack.

Chapter 2 Installing the Sun Fire X4150 Server Into a Rack with Slide-Rails 19