f.Press Enter on the terminal device to establish a connection between the terminal device and the LOM service processor (SP).
The following prompt appears.
3.Use a pencil, or other pointed object, to press and release the recessed Power button on the server front panel.
When main power is applied to the server, the Power/OK LED next to the Power button lights and remains lit.
4.To display a screen for configuring the preinstalled Solaris OS from the system management port, do one of the following
ELOM:
a.Type: cd /SP/AgentInfo
b.Type: start Console
ILOM:
Type: start/SP/Console
5. Install and configure the software, as required.
Note – Do one of the following from the serial console:
ELOM: To switch back to the Embedded LOM
ILOM: To switch back to the ILOM
