SUPERSERVER
MPS Configuration
This section allows the user to confi gure the multiprocessors table.
MPS Revision
This feature allows the user to select the MPS revision. Please follow the instruc- tions given on the screen to select the MPS revision number. The options are 1.1 and 1.4.
PCI Express Configuration
This section allows the user to confi gure the PCI Express slots.
Active State Power Management
Select Enabled to activate the function of power management for signal transac- tions between the PCI Express L0 and L1 Links. The options are Enabled and Disabled.
I/O Expander Mode
This feature allows the user to set the IO Expand Mode for Hot Plug support. The options are PCA9555, Two PCA9554, One PCA9554 (Low), One PCA9554 (High), Two PCA9554A, One PCA9554A (Low), and Two PCA9554.
PCI Express PortA (Slot4)/PCI Express PortB (Slot6)/PCI Express PortC0
(NIC1)/PCI Express PortC1 (NIC2)
This feature allows the user to confi gure the PCI Express slot specifi ed. If set to Auto, the slots with IO cards installed will be visible. If Enabled, the IO slots will always be displayed. If set to Disabled, the IO slots will not displayed. The options are Auto, Enabled, and Disabled.
PCI Express Compliance Mode
Select Enabled to enable MCH to activate the PCI Express Compliance Mode. The options are Disabled and Enabled.
Spread Spectrum
Select Enabled to enable the function of Spread Spectrum and allows the BIOS to monitor the level of electromagnetic interference caused by the components installed in the system and to attempt to reduce the electromagnetic interference when needed. The options are Disabled and Enabled.
Remote Access Configuration
You can use this screen to select options for the Remote Access Confi guration. Use the up and down arrow keys to select an item. Use the <+> and
