SUPERSERVER
5.Once the processor is properly seated in the socket, turn the lock mechanism clockwise with the fl at- head screw driver to lock it.
Repeat the above steps if you wish to install a secind processor.
Installing the Heatsinks
Installed processor
1. Do not apply any thermal grease to the heatsink or the CPU die; the if the required amount has already been applied
.
2. Locate the four heatsink mounting holes on the serverboard.
Heatsink mounting holes
Screw# 1
3. Place the heatsink on top of the processor and insert the heatsink's four pegs into the heatsink mounting holes.
Screw# 2
4.Using a Phillips screwdriver, screw in two diagonal screws (i.e. the #1 and the #2 screws) until just snug (do not fully tighten the screws, which may damage the proces- sor.) Repeat the same step to install the remaining two screws.
Installed heatsink
5.Repeat the steps above to install an- other heatsink to the secind processor (if installed).
