SUPERSERVER
C-2 Installing the ICH5R/6300 ESBDriver
1.Insert Supermicro's bootable CD into the CD drive before a system reboot, and the screen "Super Micro Driver Diskette Maker" will appear.
2.Choose "Intel ICH5R/6300 ESB Driver by 3rd Party (Adaptec)" from the list and press <Enter>.
3.From the next screen displayed, choose the OS driver you want to install and press <Enter>.
4.Insert a formatted diskette into drive A: and press <Enter> as prompted.
5.Exit the program after the process is completed. Then, reboot the system.
6 Insert the Microsoft Windows OS Setup CD in the CD drive, and the system will start to boot up from the CD.
7.Press the <F6> key when the message "Press F6 if you need to install a third party SCSI or RAID driver" displays.
8.When the Windows OS Setup screen appears, press "S" to specify additional device(s).
9.Insert the driver diskette "Adaptec Embedded Serial ATA Raid Controller Driver" into drive A: and press the <Enter> key.
10.Choose "Adaptec Embedded Host Serial ATA Raid Controller" from the list indicated in the Windows OS Setup Screen, and press the <Enter> key.
11.Press the <Enter> key to continue the installation process. (If you need to specify any additional devices to be installed, do so at this time.) Once all devices are specifi ed, press the <Enter> key to continue with the installation.
12.From the Windows OS Setup screen, press the <Enter> key. The OS Setup will automatically load all device fi les and then, continue the Windows OS installation.
13.After the Windows OS installation is completed, the system will automatically reboot.
