SUPER MICRO Computer FAN0103L4 user manual Installing the Motherboard

Chapter 4: Chassis Setup and Maintenance

6.Secure the heatsink to the motherboard as directed by the motherboard documentation.

7.Secure the motherboard to the chassis using Type A screws, which are in- cluded in the chassis accessory kit. Do not exceed eight pounds of torque per square inch when tightening down the motherboard.

8.Replace the middle and rear system fans as directed in section 4-6.

9.Replace the air shroud as directed in section 4-7.

!

Figure 4-12: Installing the Motherboard

Warning: The system fans, air shroud and chas- sis cover must be installed prior to operating the system. Out-of-warranty damage may result if the system is operated without proper cooling protec- tion in place.

!

4-13