Chapter 4: Chassis Setup and Maintenance

3

Remove

Screws14

Figure 4-15: Removing the Interior Chassis Screws on the Power Supply

3.Using a Phillips head screwdriver, remove the five screws securing the power supply to the chassis as shown above, and set them aside for later use.

4.Carefully lift the power supply up and out of the chassis.

5.Install the replacement power supply in the chassis.

6.Replace the screws which were set aside previously.

7.Replace any other components in the chassis that have been removed and replace the chassis cover before replacing the power cord and powering up the system.

4-17

Page 37
Image 37
SUPER MICRO Computer FAN0103L4 user manual Remove Screws14, Removing the Interior Chassis Screws on the Power Supply