SC743 Chassis Manual
SAS/SATA or SCSI
Hard Drive
14
14
Drive Tray
Figure D-10: Installing a Hard Drive
3.Install a new drive into the carrier with the printed circuit board side facing downward so that the mounting holes in the drive align with those in the car- rier.
4.Secure the hard drive to the carrier with the six screws provided.
5.Return the drive carrier to the mobile rack. Make sure that the drive carrier handle is returned to the closed and locked position. Repeat these steps for each hard drive you want to install.
!
Warning! Enterprise level hard disk drives are recommended for use in Supermicro chassis and servers. For information on recommended HDDs, visit the Supermicro Web site at http:// www.supermicro.com/products/nfo/storage.cfm
