SC743 Chassis Manual
D-12 Installation Procedures
Use the following installation procedures to set up the mobile rack.
!
WARNING!
SAS IDs are assigned automatically by the backplane. Do not set ID's manually on the drives.
SAS termination is enabled by default on the SAS backplane.
Installing Hard Drives into the Mobile Rack
The hard drives of the M35TQ mobile rack are mounted in drive carriers to simplify their installation and removal from the chassis. These carriers also help to promote proper airflow within the mobile rack drive bays.
Release Button
Figure D-7: Hard Drive Release Button
Removing Hard Drives from the Mobile Rack
1.Push the release button on the hard drive, which will extend the drive handle
2.Use the drive handle to carefully pull the drive from the mobile rack.
