X7DBU/X7DGU User's Manual
VLAN Tagging
Select Enabled to enable Virtual LAN(s) for IPMI connections and allow the user to configure VLAN settings. The options are Enabled and Disabled.
VLAN ID
If VLAN Tagging above is set to Enabled, this item allows the user to change the VLAN ID. If VLAN Tagging is disabled, this item will be ignored by the firmware.
IP Address Source
Select the source of this machine's IP address. If Static is selected, you will need to know and enter manually the IP address of this machine below. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host Configuration Protocol) server in the network it is attached to, and request the next available IP address. The options are DHCP and Static.
IP Address
This item displays the IP address for the IPMI connection detected.
IP Subnet Mask
This item displays the IP Subnet Mask for the IPMI connection detected.
Default Gateway
This item displays the Default Gateway for the IPMI connection detected.
MAC Address
This item displays the MAC Address for the IPMI connection detected.
Update LAN Settings
This item saves the IPMI Lan Configuration settings into memory. If you wish to change any of the settings, select Yes and press F10 to save your settings. Otherwise, leave this setting to its default setting of No.
