Main
INSTRUCCIONES EN ESPAOL INCLUIDAS.
ATSC STB
6900DTE
OWNERS MANUAL
Table of Contents
Indice
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
IMPORTANT SAFEGUARDS
TO RAIN OR MOISTURE.
CAUTION:
Page
Location
Precautions
Information on digital broadcasting
Major features of STB
REMOTE CONTROL
Location of controls
FRONT PANEL
15
5DVI, COMP. switch: When you have connected to the DVI-D HDCP OUT jack, switch this to DVI. For the
8COMP. OUT jacks (Y/ Pb/ Pr): Use this connection or the DVI-D HDCP OUT jack to enjoy HDTV. Connect
9AC power cord: Connect to AC outlet. 10 RESOLUTION SELECT switch (1080i/ 720p/ 480p):
REAR PANEL
Installing batteries
Accessories
2 Antenna
If unit is not connected properly according to diagram unit may experience power failure.
Rear panel of STB
Connecting the Smart Antenna
Right
Control box
Wrong
Control box Splitter
Connecting a different antenna
When you connect the antenna cable to another device, be sure to use a splitter as shown below.
Right Splitter
2 Antenna
Wrong
STB connection using DVI-D HDCP OUT jack to HDTV
Connection to a TV or monitor
3 TV/Monitor
STB connection using COMP. OUT jacks to HDTV
Page
Or
STB connection using S-VIDEO OUT or CVBS OUT (Composite) jack to SDTV
STB connection to a decoder with Dolby Digital
4 Other
Or
STB connection to a standard stereo system
4 Other
VCR
STB connection to TV and Video devices (VCR, DVD recorder, etc)
SETUP WIZARD
3Select SETUP using navigation buttons
4Select the language using navigation
5STB starts scanning channels.
Initial setup
6SETUP WIZARD 3/8 appears.
7Select ON or OFF for Daylight Saving Time (DST) using navigation b uttons
8Select your time zone using navigation buttons oo/ pp/ ss/ BB,then press ENTER.
See INFORMATION on Time Zones on pages 44-45.
5 Initial Setups (Setup Wizard)
12 If this information shown is satisfactory, use the navigation buttons
13 Select the screen ratio using navigation
See Selecting screen formats on page 41 for details.
14 Select the desired display mode using navigation b uttons
Unit should not be left on for a long period of time, it may cause over heating.
26-1
Watching TV
Page
The channel banner provides you with information on the channel you have selected.
1Press INFO to display the channel banner.
INFO
Puffy the Vampire Slayer
Channel banner
Information icons
26-1
Components of Channel Banner
1Press AUDIO.
Choosing audio and language
1 Press STILL TV.
2Press any button to quit.
Picture Still
On screen messages
1Press EPG button while watching TV.
2Select the desired program using navigation b uttons
3Press ENTER.
Electronic Program Guide (EPG)
To clear the EPG: Press EPG or PREVIOUS. The previous program appears.
Components of Electronic Program Guide (EPG)
26-2
Information icons
EPG
Sat, Jan 31 2:07 PM
Setup menu options
Add or delete desired channels in the channel map.
NOTE :
2Select CHANNEL using navigation
3Select ADD/ DELETE using navigation
Adding/Deleting channels
Adding channels
E.g., deleting channel 26.
Added
Indicated
4Enter channel number 26.
5Select ADD using navigation buttons oo
6Press SETUP to exit SETUP menu.
/ pp,then press ENTER. 26 is added to the channel map.
/ pbuttons.
26-1
Channel map : Indicates a digital channel.
Information on channel map
You can verify the signal strength of each channel to get a clearer picture.
E.g., to adjust channel 26-1.
Adjusting antenna
or
6Press SETUP to exit SETUP menu.
Receiving channels
2Select CHANNEL using navigation
3Select AUTOSCAN using navigation
or
7-1
AUTOSCAN menu appears.
Selecting screen formats (Screen ratio and Display mode)
2Select DISPLAY using navigation
3Select DISPLAY MODE using navigation
4Select the desired display mode using
Page
2Select CLOCK using navigation buttons
3Select DST using navigation buttons oo/
4Select ON or OFF using navigation buttons ss/ BB,then press ENTER.
Setting the clock
5Select TIME ZONE using navigation
TIME ZONE setting menu appears.
MOUNTAIN:
ATLANTIC:
or
Adjusting the clock automatically
Setting a new password
6Use the navigation buttons oo/ ppto select SET and press ENTER.
Number
Navigation buttons /
V-CHIP options
2Select DETAIL using navigation button
button oo/ pp,then press ENTER.
4Enter the default password 0000.
After you enter the default password, V-CHIP/CC
5Select NEW PASSWORD using
Setting for V-CHIP/CC
5Select V-CHIP/CC using navigation
6Select STB or TV using navigation buttons ss/ BB,then press ENTER.
To set V-CHIP/CC settings, choose STB. If you choose STB to control V-CHIP Ratings:
If you choose TV to control V-CHIP Ratings:
Setting MPAA rating
5Select MPAA RATING using navigation
MPAA rating setting menu appears.
6Select your desired rating level using
E.g., to block all PG-13 movies:
Lock indicators are added to programs rated PG-13 and above.
Setting TV rating
5Select TV RATING using navigation
TV rating setting menu appears.
FV V S L D
V-CHIP / CC QUIT CHANNEL DISPLAY CLOCK DETAIL
Set TV rating TV-MA TV-14 TV-PG TV-G TV-Y7 TV-Y
Page
Closed caption options
5Select CLOSED CAPTION using
6Select CLOSED CAPTION using
The CLOSED CAPTION selection screen appears.
7Select the setting you want for closed captions using navigation buttons oo/ pp,then press ENTER.
Your selection is activated.
9Select the setting you want for DTV CC using navigation buttons oo/ pp,then
Your selection is activated.
The CC STYLE selection screen appears.
10 Select CC STYLE using navigation
11 Select the setting you want for CC STYLE using navigation buttons ss/ BB,
Page
Choose English, French or Spanish for the screen menu.
MENU LANGUAGE
ENGLISH is the default.
3Select MENU LANGUAGE using
Choosing the screen language
Choose whether to have sounds on or off when using on screen menus.
SOUND EFFECTS
3Select SOUND EFFECTS using
ENTER to switch between ON and OFF.
Choosing sound effects
Troubleshooting
8 Others
Glossary and AcronymsSpecifications
8 Others
PANEL TRASERO
PANEL FRONTAL
Ubicacin del control
Antes de utilizar
MANDO A DISTANCIA
9 Gua rpida en espaol
Conexin STB utilizando la toma DVI-D HDCP OUT en HDTV
Conexiones de antena
Conexiones de TV/Monitor
Conexin de la antena inteligente
Conexin a una antena inteligente
Conexin STB a un decodificador con Dolby Digital
Otras conexiones
Conexin STB utilizando la toma S-VIDEO OUT o CVBS OUT (Compuesto) a SDTV
Conexin STB utilizando las tomas COMP. OUT al HDTV
9 Gua rpida en espaol
Ajuste inicial
ASISTENTE DE AJUSTES
Ajustes iniciales (Asistente de ajuste)
Conexin STB al TV y equipos de video (VCR, grabador DVD, etc.)
Conexin STB a un sistema estreo normal
Page
Page
LIMITED WARRANTY
ATTENTION: