TV/Monitor Connections

1Refer to "Antenna Connections"Connectionto connect thetoSTBatoTVthe Smartor monitorAntenna (or a different one if you wish).

2Use a DVI (DVI-D) video cable to connect the DVI-D HDCP OUT jack on the STB to the DVI input jack on your television.

NOTE:

Connect to a DVI input jack that conforms to EIA-861 and HDCP. Some HD Monitors designed for PC applications using the DVI-D jack may not work with this connection. Refer to your television’s manual for details.

3Switch the Output selection switch (DVI, COMP.) to "DVI".

4Switch the RESOLUTION SELECT switch (1080i/720p/480p) to suit your television. Refer to your television’s manual for details.

5Plug the AC power cord of the television into the AC outlet and turn the television on.

6Switch the input mode of the television to that corresponding to the DVI input jack. Refer to your television’s manual for details.

7Plug the AC power cord of the STB into the AC outlet and turn it on.

15

EN

Connections

3 TV/Monitor

1A23

Page 15
Image 15
Sylvania 6900DTE owner manual Connections TV/Monitor