Before Using
REAR PANEL
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|
|
|
|
| D. | AU D I O O U T |
| |
|
|
| C V B S |
|
|
| Y |
|
|
|
| O U T |
|
|
| C OA X . | |
|
|
|
|
|
|
| ||
A N T. I N |
|
| L |
|
|
| P b | |
DVI - D HDCP OUT |
| OPT |
|
|
|
| P r | RESOLUTION |
|
|
|
|
|
|
|
| SELECT |
|
|
| R |
|
|
|
|
|
A N T. | D. AU D I O |
|
| 1 |
| 2 | C O M P. | 1 0 8 0 i / 7 2 0 p / 4 8 0 p |
DV I | COMP. |
| S - V I D E O | |||||
C T L | O U T | AU D I O O U T | O U T | O U T | ||||
1 Before Using
12 11 10
1 ANT. IN jack: Connect an antenna.
2 ANT. CTL jack: Connect the control cord of the smart antenna. Not for phone jack.
3
4 DIGITAL AUDIO OUT (OPT.) jack: Connect a decoder or an amplifier with a digital optical cable. Use this jack or the coaxial jack to connect to a receiver with Dolby Digital for Dolby Digital 5.1 playback.
5 DVI, COMP. switch: When you have connected to the
6 CVBS OUT jack (Composite): Connect your TV or VCR with a standard video cable.
7 DIGITAL AUDIO OUT (COAX.) jack: Connect a decoder or an amplifier with a digital coaxial cable. Use this jack or the optical jack to connect to a receiver with Dolby Digital for Dolby Digital 5.1 playback.
8 COMP. OUT jacks (Y/ Pb/ Pr): Use this connection or the
Y (green), Pb (blue), Pr (red)
9 AC power cord: Connect to AC outlet.
10 RESOLUTION SELECT switch (1080i/ 720p/ 480p): Select the STB video output resolution - 1080i, 720p or 480p. The default setting is 1080i. Change this setting to suit your television when you have connected through either the
11
12 AUDIO OUT jacks (2 pairs): Connect your TV, stereo system or VCR to with standard audio cables.
NOTE for audio output: Both digital and analog audio are output during digital broadcasts. When you want digital audio output, connect a digital decoder to the digital audio (coaxial or optical) jack. Refer to the page describing connection to a decoder with Dolby Digital.
9
EN
1A23
