27
2.0 Configuring TalkSwitch
Message Waiting Light:
Click on this option to set a message waiting light to indicate when a message
has been received for an extension. You can select on which local extensions
in your system the light will be activated when a message is received. This
option can be useful since remote voice mailboxes are not associated with any
local extensions.
Configuration Notification Options:
Define how TalkSwitch will dial out of your office when notifying you of a
voicemail. If the first connection is not successful, define how many times, and
at what intervals TalkSwitch will continue to attempt to reconnect.
Under the conditions where you choose to be notified by both pager and remote
phone, TalkSwitch makes sure that both locations have been contacted before
finishing the notification process.
Dial notification phone number…
These parameters control which Hunt Group is used for both the Remote
Phone and Pager Notification calls. It also allows you to adjust the number
of rings before it will abort the attempt then follow the parameters listed in
the next section.
If attempt unsuccessful…
These parameters control how many times TalkSwitch will try to notify the
Remote Phone or Pager before it will abort the entire notification attempt.
You can also specify the time interval between attempts.