90 TalkSwitch User Guide
The first things you should check
1. Check that your telephone cables are connected to a wall jack at one end and
TalkSwitch at the other. Ensure the devices you are using as TalkSwitch exten-
sions (phones, faxes, etc.) are plugged into the extension jacks located on the
back panel of TalkSwitch. (Do not plug your extensions directly into a wall
jack unless that jack is wired to a TalkSwitch extension jack.)
2. Check the Serialor USB connection between TalkSwitch and your PC.
3. Ensure that TalkSwitch’s power adapter is plugged into a working power
outlet and that TalkSwitch is turned on. Please make sure that you are using
the power adapter that was provided with TalkSwitch. This is a unique
adapter and it cannot be substituted with any other adapter. If your adapter
appears to be defective, please contact your reseller to order the proper
replacement adapter.
Diagnostic codes for the lights flasing on the front panel of TalkSwitch
Line 1,2,3,4 lights flashing simultaneously: The Unit ID of this TalkSwitch is in
conflict with another TalkSwitch unit on the same LAN. Make sure you assign a
different Unit ID to each TalkSwitch unit.
Line 2 and 3 lights flashing simultaneously: There is a file system error. To fix
the problem, reboot TalkSwitch. It will do a file system check and fix any problems
encountered. If this does not resolve the problem, contact your reseller.
Line 1 and 4 lights flashing simultaneously: There is a voice mailbox error. To fix
the problem, reboot TalkSwitch. It will do a file system check and fix any problems
encountered.
Line 3 and 4 lights flashing simultaneously: Firmware not loaded or corrupted
error. To fix the problem, reload the TalkSwitch firmware. Make sure you update
with the last version you updated with. Do not use an old version off the install
CD if you have updated your system at least once.
Line 1 and 4 then Line 2 and 3 lights flashing alternately: System prompts not
loaded or corrupted error. To fix the problem, reload the TalkSwitch firmware.
Make sure you update with the last version you updated with. Do not use an old
version off the install CD if you have updated your system at least once.