CHAPTER 1 FEATURES
BACK PANEL COMPONENTS – EXTERNAL TAPE DRIVE
Figure
Figure
On/Off Switch Used to turn power on and off.
AC Power Connector Used to provide power through a grounded AC power connector. A power cord is included with the tape drive.
Serial Connector Used to connect the tape drive to the serial port of a computer for performing diagnostic operations with VXATool (see page 31).
SCSI Connectors (SCSI tape drive only) Used to connect the tape drive to the SCSI bus with two SCSI cables or one SCSI cable and a terminator. These connectors are
SCSI ID Switch Used to set the SCSI ID.
4
| PRODUCT MANUAL | |
| ||
|
|
|
|
|
|