Tandberg Data VXA-320 (VXA-3) Integrating The Tape Drive, application instructs you to do so

CHAPTER 2 INSTALLATION

INTEGRATING THE TAPE DRIVE

After installing the VXA-320 tape drive, you may need to integrate it with your backup software application and computer operating system. The Support section of Tandberg Data’s web site, www.tandberg.com, provides a list of backup software applications and operating systems that are compatible with the VXA-320 tape drive.

If your backup software application does not support the VXA-320 tape drive, you can use VXATool to change the product identification information (Inquiry String) that the tape drive returns to the software. Changing the tape drive’s identification information does not affect the tape drive’s speed or capacity. For instructions on using VXATool to change the tape drive’s Inquiry String, refer to the help or readme file provided with VXATool. Additional information is available at: www.tandberg.com (article #2002).

Refer to the information provided with your backup software application for device integration instructions. Refer any questions regarding software configuration and operation to your software provider.

The CD included with the tape drive provides device drivers for use with the Windows operating system.

!Important Do not install these drivers unless you are using the Windows native backup software application or unless your backup software

application instructs you to do so.

18

PRODUCT MANUAL 433689-01