Tandberg Data VXA-320 (VXA-3) Monitoring The Leds, 1 LED states, Operation, LED Pattern, LED #1

CHAPTER 3 OPERATION

MONITORING THE LEDS

The VXA-320 tape drive uses four LEDs to indicate its operational status, as shown in Table 3-1.

Note: The LEDs are numbered 1 through 4 from left to right.

Table 3-1 LED states

Operation

LED Pattern

LED #1

LED #2

LED #3

LED #4

	Operational Conditions
Power-on self-test		LEDs illuminate sequentiallya
No tape loaded		Off	Off	Off	Green
Interface activity; (LED		Off	Off	Off	Flashing
4 may flash with other
					Green
LED operations)
Tape loading or		Off	Flashing	Off	Off
unloading			Green
Tape ready; idle		Off	Green	Off	Off
Reading					Off or
		Off	Off	Green	Flashing
					Green
Writing			Amber or		Off or
		Off		Amber	Flashing
			Greenb
					Green
Space forward		Off	Off	Flashing	Off
				Green
Space reverse or		Flashing	Off	Off	Off
rewinding		Green
Cleaning in process		Flashing	Off	Flashing	Off
		Green		Green

Service Notification

Cleaning required	Off		Flashing	Off	Off
			Amber
Cleaning tape used up	Off		Flashing	Off	Off
			Green/Amber
Recoverable errorc	Amber		Green	Amber	Off or Green
Unrecoverable errorc	Amber		Off	Amber	Off or Green
Factory service		Flashing Green or Amber			Flashing Red
requiredd

20

PRODUCT MANUAL 433689-01