3 - Connections
18
TASC AM D A-78H R

3.1.4 SPDIF connectors

The coaxial RCA digital audio connectors on the rear
panel allow connection of an SPDIF-eq uipped device
(e.g. a DAT recorder).
This digital u nit should be used as a clock s ource if
data is to be read from it
When synchronizing to the signal received at the
COAXIAL DIGITAL IN, set the CLOCK ke y so that
the DIGITAL IN indicator lights.
3.2 Synchronization connections
The DA-78HR has facilities for control and synchro-
nization with other units. For full details of how to
operate the DA-78HR with other units, see 8, “Syn-
chroni zatio n with ot he r DTRS units” an d 9, “Oper a-
tions related to timecode”.

3.2.1 Word clock connections

This set of BNC connectors is used to synchronize
the DA-78HR to other digital audio devices.
The CLOCK key is used to change between clock
source s , an d sh ou l d be se t t o WORD when syn chro-
nizing to an external word clock (the WORD
indica-
tor will light).
The IN jack should be connected to the WORD
SYNC OUT of th e dig ital a udio device from which
the DA-78HR is to receive the synchronization clock.
The OUT outputs word clock information provided
from the DA-7 8H R, whil e th e THRU, to echoes the
signals received at IN.
Note that if the DA-78HR is connected to other
DTRS units, the WORD SYNC jacks do not need to
be connected between the DTRS units.

3.2.2 MIDI conn ect ors (IN , OUT an d

THRU)

These standard 5-pin DIN MIDI connectors are used
to carry MIDI Time Code (MTC) and MIDI Machine
Control (MMC) information between the DA-78HR
and oth er suit a bly-e qu ipped un its (fo r insta nc e,
sequencers capable of being synchronized to MTC,
and capable of transmitting MMC commands).
The MIDI parameters are set through the menu
system (see 10, “MIDI control”).
Note the difference between MIDI OUT and MIDI
THRU. The OUT connector outputs signals which
originate from the DA-78HR. The THRU connector
echoes messages received at the IN.

3.2.3 Timecode connections

The DA-78HR can be synchronized to externally-
generated timecode and is also equipped with an
internal timecode generator.
SMPTE/EBU timecode can be received at the TIME
CODE IN RCA jack, and can be transmitted from the
TIME CODE OUT RCA jack.
See 9, “Operations related to timecode” for details.

3.2.4 MIDI ti mecode conne ct ions

The three MIDI connectors, IN, OUT and THRU, con-
form to the MIDI standards for such connectors.
3.3 Connection to other TASCAM units
By a “TASCAM unit”, we mean another DA-78HR,
a DA-98, DA-88 or a DA-38 unit, or an optional
remote control unit, which may also be connected in
a “chain” with multiple DTRS units.

3.3.1 REMOTE IN

This jack on the rear panel can be used to connect a
remote control unit such as RC-808 remote control
unit.
Basic control can be carried out using this unit, but
more advanced operations will not be possible.

3.3.2 Footswitch

A footswitch such as the optional TASCAM RC-30P
footswitch can be connected to the REMOTE PUNCH
IN/OUT jack on the rear panel.
This footswitch allows hands-free punch-in and
punch-out.
When a track or track is armed, and the unit is in play
mode, pressing the footswitch once will drop th e unit
into record mode, and pressing it again will drop it
back into play mode.
The footswitch, rather than the transport keys, can
also be used to set punch points, as described in 5.6,
“Punch-in and punch-out”.

3.3.3 Multi pl e DTRS units

Use a TASCAM PW-88S cable when connecting
other units to the REMOTE/SYNC IN connector or to
the SYNC OUT connector.
This synchronization cable will carry the internal
synchronization code and the transport signals, etc.
There is no need to make any other connections,