Technicolor - Thomson CCU DT 500 screws F/90 M3x4, THOMSON TTV1707 / CCU DT500, B1707M00LD

126	Chapter 2 - Installation
	Installation of ccu in rack

3.Tighten the six 4 mm dia. screws with the allen wrench from inside the accessory rack to attach it to the CCU DT500.

6 screws CCUF/90HC M4

allen wrenchCCU

4.Place the front cover panel against the left-hand edge of the CCU DT500 (only one position is correct).

front coverCCUpanel

5.Tighten both the 3 mm dia. screws with the screwdriver from inside the accessory rack to fit the front cover.

2 screws F/90 M3x4

THOMSON TTV1707 / CCU DT500	B1707M00LD
User manual	September 2000